Characteristics and Application of dry Hot blower-High pressure blower.
1. Introduction of dry hot blower:
The main results are as follows: 1. The dry hot blower generally uses nickel-chromium wire electrified heating air as the hot air source, which is clean and hygienic.
In the work, the air passes uniformly from the inside / outside of the spiral electric heating wire, the heat exchange is uniform, and the loss of wind pressure and flow is small.
2. The temperature is controlled by PID/SSR and the reaction is fast. Some models are equipped with overheat overload protection device and K-type thermocouple at the air outlet to detect the air temperature directly.
3, thermal insulation cotton, using spray shell, sustainable operation.
4. The operating temperature can reach 350 ℃, and there are many occasions in which the air volume can be adjusted by frequency converter.
Dry hot blower.
Second, the application of drying hot blower:
1. Thermal shrinkage of bottle cap seal.
2. Thermal shrinkage of bottle label.
3. Bottle box / inkjet drying.
4. Pipe / cable water cutting and drying.
5. Printing drying.
6. the inner wall of the tubule is dry.
7. Simple assembly drying room.
8. Bend pipe (metal / plastic).